#Fnet pcclone ex lite software install
#Fnet pcclone ex lite software update
#Fnet pcclone ex lite software software
#Fnet pcclone ex lite software Pc
#Fnet pcclone ex lite software mac

#Fnet pcclone ex lite software software

The PCClone Lite software is just that, lite…on features. You can then either click Start or Cancel with your mouse, or press the one touch backup button a 2nd time to start the actual backup process. Pressing the oval button on the adapter will cause a popup to display on your screen.

#Fnet pcclone ex lite software mac

Sorry, no Mac version of this software is currently available. Once installed, a small icon appears in the task tray of your Win XP computer.

#Fnet pcclone ex lite software install

To utilize this feature, you have to install an application called PCClone EX Lite which is included on the mini CD. Where this new one differs is with the addition of the one touch backup button. Using this cable for copying files back and forth between 2 drives and your desktop PC/Mac is pretty much the same as using the previous version of this product. I was very happy with the performance during my tests. I also ran the same tests on my iMac, and received similar results. These numbers really don’t mean anything though, because everything depends on the speed of the drives and the speed of your computer.

#Fnet pcclone ex lite software Pc

WMV video of the Napoleon Dynamite movie.įile copy from PC to Hitachi SATA 5 secondsįile copy from PC to 2.5 Toshiba IDE 32 secondsįile copy from Hitachi SATA to PC 7 secondsįile copy from Hitachi SATA to 2.5 Toshiba IDE 33 secondsįile copy from 2.5 Toshiba IDE to Mac 12 secondsįile copy from 2.5 Toshiba IDE to Hitachi SATA 6 seconds The test file that I used for all of the transfer tests was a 118.3mb. I had no problems copying files, moving files, running programs, watching videos or listening to audio files using this adapter and the test drives. The answer is YES, you can connect them, but they won’t work. You might be wondering if it is possible to connect 2 IDE devices at the same time to this adapter. Maybe the next version of this adapter will have the power switch on the opposite side of the brick. The small Blue power light on the power brick remains lit even when it is not supplying power to the adapter. The only bad thing about the power switch is the fact that the only way you really know if the drives are powered off, is by feeling them for vibrations, listening for whirling platter noise, or seeing if the drives are still mounted on your PC/Mac.

#Fnet pcclone ex lite software update

This is a welcome update as it was lacking in previous versions of this product. It’s housed in the oval shaped blob in the middle of the cord leading to the adapter. I should also mention at this point, that the power brick included with this adapter, has an ON/OFF switch built into the cable. Again, both drives worked fine when connected in this manner. Files could be copied back and forth between the drives and back and forth between my desktop computer.Ī much more tidy configuration is pictured here with the same SATA drive and a 40gb Toshiba IDE. Even though it looks sorta messy, both drives mounted and worked as expected. The Y power cable was also needed for this particular setup. It may be hard to discern in the image, but I had to use the female to male IDE extended cable to connect the IDE drive to the adapter due to the fact that the SATA drive obstructed the 40-pin IDE connector. In the image above, you will see that I have an 80gb Hitachi SATA drive and a 80gb Western Digital IDE drive connected to the adapter at the same time. Another tidbit to remember is that 1.8 and 2.5 inch IDE drives can run by USB juice alone.

Just plug the included power brick into the adapter and you’ll be fine. That could result in bad bad things happening to your drive. The main thing you should remember, is to NOT connect power to an SATA’s 4-pin power connector AND the power connector on the adapter. The status LEDs show Power, Read/Write activity and SATA connectivity.Ĭonnecting the adapter to your drives is not rocket science, but there are a couple of important things to be aware of that the included instruction sheet fails to mention. The button initiates the one touch backup feature (more about that in a bit). The new adapter is a 3.0 x 2.5 x 0.5 inch plastic box, that has 1 button, 3 status LEDs and 5 connectors. One look at the new design of the main adapter revealed a built in power connector for the SATA connection. This first thing I noticed when I opened the box, was the fact that there weren’t as many cables included with this version of the product. USB 2.0 To SATA/IDE Adapter With One Touch Backup SATA Interface: High speed data transfer rates up to 1500Mb/secĪTA/ATAPI: Support 16-bits DMA and Ultra DMA mode interface (Ultra 33/66/100/133)ĭual Mode: Support bisynchronous mode, compatible to SATA and IDE device simultaneously Supports IDE and enhanced IDE hard drives up to 500GB